Product Carousel Tabs
No products were found matching your selection.
e*13 PF30 Bottom Bracket
Our threaded PF30 BB adapts e*thirteen cranks with 30mm spindle to PF30 BB shells. E*thirteen PF30 BBs are designed to handle even the rigors of downhill use with a solid connection via the threaded center tube to keep cups from walking, even under the hardest impacts.
Custom seals, grease fill and angular contact bearings are designed from the ground up for top-notch durability and smooth spinning.
Adapts your Press Fit 30 frame to run e13 DH/XC or Fifteen G cranksets
e*13 BB30 Bottom Bracket
Wider is better with the e*thirteen BB30 bottom bracket. Our threaded BB30 bottom bracket adapts all cranks with 30mm spindle to frames running BB30 BB shells (42mm bore diameter).
The BB30 bottom bracket spaces the bearings nice and wide outside the BB shell for maximum stiffness and a threaded centre tube keeps bearings properly aligned for longer life. Custom seals, grease fill and bearings are designed from the ground up for top-notch durability and smooth spinning.
DT SWISS 240s MTB Rear Hub (Standard) – Jbend – 6bolt
Swiss precision engineering, machining and assembly together with clever detail solutions have made of the 240 what it is today: A legend. Featuring the latest refinements the 240 hubs are extremely lightweight and extremely durable. The Ratchet System is the best solution for a freewheel system, since it can transfer high loads while being super light. Just what athletes want: Perfect transmission of their power and the reliability allowing them to focus on the ride.
Race Face Stash Tool Wrap
Your knight in shining armor and trail fairy all rolled into one. This little gadget allows you to keep a couple of emergency tools, a CO2 inflator and a spare tube conveniently tucked away on your bike in case of disasters. You can mount it in your frame or under your seat allowing maximum versatility and minimum fuss. With a huge velcro securing tab you know your precious tools will be held in place safe and sound till you need them.
e*13 TRS Race All Terrain Tyre
For 2018, our TRS tires are reengineered with a more stable, supportive casing, and better puncture protection. The reengineered TRS tyres carry over the same tread pattern, however, the second generation e*thirteen tyres use tapered Apex inserts, which dramatically improve grip under cornering and braking, decrease rolling resistance, and dramatically increase the tire’s puncture resistance. On Race tyres, there’s an added a layer of woven aramid reinforcement that not only maximizes air retention, but better protects against sidewall cuts and punctures. Both Race and Plus tires use a slow rebound, tacky rubber throughout the tyre, but the Race version uses high-tack rubber on the side knobs to maximize cornering and off camber grip.
DT SWISS 240s Road Front Hub – Jbend – Non Disc (QR)
The DT Swiss 240s road hub hits the sweet spot between lightweight and reliability. On the winning end of countless Grand Tour stages and local races alike, these hubs will roll for thousands of nearly frictionless miles.
e*13 TRS Race Semi-Slick Tyre
Roll fast, and corner faster with e*thirteen’s SEMI-SLICK tire. Speed doesn’t always have to come at the cost of traction. We say, “Have your cake, and eat it too.” The tightly-spaced, straight-stacked center knobs provide low surface resistance without reducing traction in heavy braking or climbing situations. Angled sipes soften the side knobs for predictable traction, without allowing the tire to “squirm” or roll under heavy cornering. Finally, directional sipes benefit braking and cornering, without sacrificing durability. Available in a single ply TRS casing, RACE compounds feature soft, tacky cornering knobs and with a longer-wearing center-tread compound.
Race Face Vault Hubs
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost, multiple axle standards and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness and proven 6902 bearings were selected due to their large ball diameter and durability. A 60 tooth drive ring alternately engages six double tooth pawls, giving you 3° engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting these internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster, but adapts faster.
Ride Concept – Livewire Men’s – Black/Charcoal
THE LIVEWIRE MOUNTAIN BIKE SHOE EXCEEDS THE TECHNICAL DEMANDS OF BIG MOUNTAIN RIDING WITHOUT SACRIFICING EVERYDAY STYLE.
This is your daily driver, wear-everywhere, tough-as-nails, do-it-all, ninja-approved, high-performance flat pedal shoe.
e*13 Tyre Plasma Sealant – 1L
Tyre Plasma is a uniquely compounded acrylic resin with self cross-linking properties. It’s designed to provide quick and efficient puncture blocking to prevent the loss of air pressure. It’s non-toxic, and cleans up with water, and it won’t break the bank to seal up your tires!
e*13 Guidering M Narrow Wide Chainring
E*thirteen Guidering M chainrings boast a revoluntionary dual width tooth design to help keep your chain locked on your ring and not dropped on the trail. Months of testing and numerous iterations have yielded a long-wearing shape and finish ensuring your chain stays put even after months of use.
e*13 Rim Tape – 40m
Most tubeless tape has as least one weakness. It doesn’t stick well, leaves a residue when removed, is hard to install, is too thick or too thin. Our tape balances the needs of tubeless users with a purpose designed tape, not just our favourite tape from the hardware store.
e*13 PF30 Bottom Bracket
Our threaded PF30 BB adapts e*thirteen cranks with 30mm spindle to PF30 BB shells. E*thirteen PF30 BBs are designed to handle even the rigors of downhill use with a solid connection via the threaded center tube to keep cups from walking, even under the hardest impacts.
Custom seals, grease fill and angular contact bearings are designed from the ground up for top-notch durability and smooth spinning.
Adapts your Press Fit 30 frame to run e13 DH/XC or Fifteen G cranksets
e*13 BB92 Bottom Bracket
Adapts cranks with 30mm spindle to fit a BB92, BB107 and BB121 BB shell. The BB92 BB is a specially made bearing that presses directly into frames, providing a solid base for cranks, even frames with limited crank options. Custom seals, grease fill and angular contact bearings are designed from the ground up for top-notch durability and smooth spinning. All of our BBs include our 1 year, no questions asked bearing guarantee.
Race Face Alloy Crank Boots
Trail riding can be tough on your gear. The ends of your aluminum cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Race Face Next SL Medium & G4 Crank Boots
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Race Face Turbine 31.8mm Stem
The Turbine stem is highly engineered to maximize stiffness, minimize weight, and guarantee your cockpit won’t get overlooked. Featuring aerospace 7075 aluminum alloy, this stem is ideal for high level cross country racers but is strong enough for all mountain epics.
Race Face Direct Mount, Narrow Wide – Cinch
Direct mount chainring for use with Race Face cranks with CINCH system interface. The Race Face CINCH system allows for easy switching between direct mount rings and spiders, giving you plenty of flexibility for trying out different drivetrain options. Built from aerospace grade 7075-T6 aluminum for excellent durability.
Products Carousel
Music
Trending Products
Bestsellers
Top Categories this Month
Recently Viewed
DT SWISS Shimano 11spd Road Freehub For 3-pawl Hubs
Replacement Shimano 11spd Road freehub for DT Swiss 3-pawl equipped hubs
If you require the matching end cap for drive train conversions:
e*13 Helix R 12 Replacement Cluster
Unlike other brand, Helix R cassettes have replaceable gear clusters. That means ongoing service and replacement costs will be less than half that of other brands cassettes. As an added bonus, Helix R 12s clusters are backward compatible with and can be used to upgrade your existing TRS+ 9-50 cassette.
Theragun mini Stand
This sleek metallic stand displays your mini while keeping it easily accessible any time you need quick relaxation. With a sturdy base and convenient opening providing access to its charging port, the mini Stand is the go-to way to store your device.
*Theragun mini and charger not included
Formula Thirty-Five 35 29″ Forks Std
The 35 is the result of years of development focused on one aim, achieving a definitive enduro suspension fork. The 35mm stanchions give exceptional stiffness to the 35, although, at the same time, they do not compromise its weight, making the enduro fork the lightest on the market with 1790g.
The innovative Internal Floating Technology (IFT) gives the 35 a superb flow, which no stanchion treatment, alone, could ever equal. Thanks to the Compression Tuning System (CTS), this fork can be easily adjusted to personal preference, with extreme simplicity, for any rider. The Remote Cartridge Control (RCC) is not just a remote lockout, but also permits handlebar control of the fork compression, so it can adapt immediately to changes in riding terrain.
No other fork is as smooth as the 35, light like the 35, can be personalised like the 35 while at the same time reliable and resistant like the 35 is. With this fork we have achieved the definitive weapon for modern mountain biking.
DT SWISS Non Drive Side End Cap For 12mm EXP Rear Hubs
Non drive side end cap that pairs with and 12mm thru axle DT Swiss drive side end caps for Ratchet EXP hubs
Converts both 142mm/standard and 148mm/boost hubs but DOES NOT convert standard hubs to boost or vice versa, these hubs just share the same end caps!
DT SWISS 240 MTB Rear Hub (Boost) – Straightpull – 6bolt
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement, which reduces wear, and a smaller number of parts not only makes maintenance easier but also reduces weight.
DT SWISS 240 MTB Front Hub (Boost) – Straightpull – 6bolt
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement, which reduces wear, and a smaller number of parts not only makes maintenance easier but also reduces weight.