DT SWISS Spoke Head Washers (2.2mm)
Out of stock
Brass washers for the use between spoke head and hub flange to reduce play between spoke and flange.
- Field of application: Wheel building
- Colour: Brass
- Weight [g]: 0.01 ea
- Quantity: Bag of 1000pcs
- Refer to our DT SWISS FAQ page for further wheel building techniques
PLEASE NOTE: It is essential to use spoke head washers when there is visible play between the spoke head and hub flange. Washers should always be used when building wheels with 1.8 (triple butted spokes)
You may also like…
-
DT Swiss, Wheel Nipples
DT SWISS Squorx Pro Lock® Pro Head® Brass Nipples – Ebike Rated
DT Squorx Pro Head nipples combine ease of use, lightweight and optimum performance in a single product. The DT Pro Head shape combined with both a torx and a square tool interface makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. Available with or without the integrated DT Pro Lock threadlock system.
SKU: NPBH20150S0100
Related products
-
Wheel Nipples
DT SWISS Pro Lock® Pro Head® Brass Nipples – Ebike Rated
DT Pro Head nipples are designed for short spokes with a large spoke bracing angle such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to a homogeneous power transmission.
SKU: NPBD20140S0100 -
DT Swiss, Freehubs
DT SWISS Shimano HG Freehub For 3pawl Hubs
Replacement Shimano HG freehub for DT Swiss 3pawl hubs
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
SKU: HWRABM00S4193S -
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S
