DT SWISS Drive Side End Cap For SRAM XDR Freehubs
Out of stock
Drive side adapter that pairs with DT Swiss XDR freehubs to convert 12mm thru axle bikes to the SRAM AXS road drivetrain.
- Axle system: 12mm Through Axle / RWS
- Weight [g]: 6
- Compatibility: DT SWISS Freehub for SRAM XDR
- Pairs with: Ratchet Freehub and/or 3-pawl Freehub
- Refer to our DT Swiss FAQ page for end cap solution charts with full list of convertible hubs and wheels
| Brands | |
|---|---|
| Axle System | |
| Drivetrain |
You may also like…
-
DT Swiss, Freehubs
DT SWISS SRAM XDR Freehub For 3-Pawl Hubs
Replacement SRAM XDR freehub for 3-pawl equipped hubs.
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
SKU: HWRABM00S8111S -
DT Swiss, Freehubs
DT SWISS SRAM XDR Freehub For Star Ratchet & EXP
Replacement SRAM XDR freehub for Star Ratchet equipped hubs.
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
NOTE: This product is compatible with Star Ratchet as well as Ratchet EXP
SKU: HWRAAL00S3409S -
DT Swiss, Rear Hubs
DT SWISS 350 Road Rear Hub – Straightpull – Centrelock Disc Brake
Whoever is looking for the most affordable high performance hubs available, should take a very close look at the 350 hub line-up. The same performance as its even higher end cousins comes with slightly less weight optimized parts to offer the same reliability at a much lower cost. Being available in all standards and for any application.
SKU: H35PNCDMR24SA6174S
Related products
-
-
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S
